+- Silgrad Tower from the Ashes (https://www.silgradmodding.net/forum)
+-- Forum: Archived (closed boards) Silgrad TES IV & TES III & General discussions (https://www.silgradmodding.net/forum/Forum-Archived-closed-boards-Silgrad-TES-IV-TES-III-General-discussions)
+--- Forum: Archived Silgrad Tower Claims TESIV (https://www.silgradmodding.net/forum/Forum-Archived-Silgrad-Tower-Claims-TESIV)
+---- Forum: Archived Ebbedin Claims (https://www.silgradmodding.net/forum/Forum-Archived-Ebbedin-Claims)
+---- Thread: Claim: Ebb14 - Sparrow's Shack (Claimed, Finished) (/Thread-Claim-Ebb14-Sparrow-s-Shack-Claimed-Finished)
- TheImperialDragon - 04-21-2007
Quote:Originally posted by SACarrow
Razorwing: I did that ESP with ST ESM 2.03 and the corresponding assets; nothing else (except the OB ESM) in the CS.
What I did to the ESP using TES4Gecko was to toggle ignore on the entire Dialogue tree and then save the ESP. When I did that additional step, the COC resulted in my PC floating in space like 2001: A Space Odyssey.
What I will do is take that ESP and fix the floaters using the latest ESM and asset set. Then I will post two ESPs: with and w/o dialogue. I've done some additional NPC stuff, so I'll save that ESP and transfer the info later onto a base ESP that is agreed to be working.
Later,
Steve
Not sure if I get what you're proposing 100%, but I understand there will be two ESPs, one without dialogue, one with. Whichever is deemed appropriate to have work continued on will be used, and the NPC data will be merged to that ESP.
Quote:Originally posted by SACarrow
What I did to the ESP using TES4Gecko was to toggle ignore on the entire Dialogue tree and then save the ESP. When I did that additional step, the COC resulted in my PC floating in space like 2001: A Space Odyssey.
For that specifically, try placing an XMarker inside the shack. Any XMarker will do, then see what happens.
- TheImperialDragon - 04-21-2007
I did not experience any warnings after I cleared the DIAL tree using the TES4 PU and the new ESM 2_04.
Cannot create pathgrid - SACarrow - 04-28-2007
Almost there. I think I understand dialogue and AI well enough to set up things initially, but I can't set up a pathgrid. More info on this thread.
Thanks,
Steve
I just can't sleep! - SACarrow - 05-01-2007
I think I have a reasonable pathgrid and some basic dialogue, at least enough to get it into the ESM. The problem I have now is AI. Right now, I have just two packages: the fallback wander and a sleep package I adapted from someone else. Very simple: sleep 8 hours starting at 4 AM, lock and unlock doors, equip and unequip armor & weaponry. The problem now is that at the appointed hour, Sparrow goes to the bedroll and just stands there.
For this test, I stuck a simple bedroll on the floor and the red PG TH intersects the standing silhouette. The location is near the persistent reference of the bedroll, but she won't sleep; she just stands.
Any things I can look at before just posting the ESP for analysis?
TIA,
Steve
UPDATE: GetCurrentAIProcedure value was 7 (Wander), GetCurrentAIPackage was 4 (Sleep). I have no idea what to do with that.
- TheImperialDragon - 05-01-2007
It would be that much easier to determine the problem if I could have a look at the file.
I was afraid of that... - SACarrow - 05-01-2007
But my searching through the forums at TES only turned up one complaint that looked like mine -- and nobody responded.
Here is the ESP and a model for the bedroll. Nothing original, just using a different furniture marker. Place it under Meshes\ST\Dunmer\Shack\Furniture. Also feel free to sub another bed; I've already tried a couple. Thanks for the help,
Steve
- TheImperialDragon - 05-01-2007
Why does it say "Bad AI" in the filename?
- SACarrow - 05-01-2007
Because the AI doesn't work.
- TheImperialDragon - 05-01-2007
Quote:Originally posted by SACarrow
Because the AI doesn't work.
Mwahaha :brew:
- TheImperialDragon - 05-02-2007
I looked, it looks like it should work. I'd try specifying the location to "Near Reference" and select the bed as the reference, see if that helps any.
If not, maybe it's the editted bedroll? It might need to be used with certain animations to work, but you said you tested it with other models, so I don't think that's the problem.
hrug: