+- Silgrad Tower from the Ashes (https://www.silgradmodding.net/forum)
+-- Forum: Archived (closed boards) Silgrad TES IV & TES III & General discussions (https://www.silgradmodding.net/forum/Forum-Archived-closed-boards-Silgrad-TES-IV-TES-III-General-discussions)
+--- Forum: Discussion boards for our towns & cities TESIV (https://www.silgradmodding.net/forum/Forum-Discussion-boards-for-our-towns-cities-TESIV)
+--- Thread: FPS problems. (/Thread-FPS-problems)
Pages:
1
2
FPS problems. - noremorse - 07-28-2006
I have been testing out a few of my claims lately, and every time I walk outside, usually between SID and NID to cross the bridge, my FPS drops from around 25 to 1 or 2 per second.
I just thought I'd point that out, because it takes me a few minutes just to cross the bridge. Is any body else getting this? I shouldn't be.
I'm running:
-AMD Athlon™ 64 X2 Dual Core Processor 3800+, MMX, 3DNow (2 CPUs), ~2.3GHz
-Corsair XMS 1GB Ram
-eVGA NVIDIA GeForce 7800 GT
- Aorawn - 07-28-2006
You could switch computers with me. I can gauruntee no framerate drops ever; mainly because my FPS is always around 1.
- noremorse - 07-29-2006
At least yours is steady, huh? :lol:
- Razorwing - 07-29-2006
noremorse: My first question would be if you're playing with the esp from RP 6.0? Because we did a few fixes around that particular area in version 6.0. The bridge is now cut in several parts, and all the buildings inside the fake town mockups are lod. I used to experience an FPS drop too, albeit not as severe as the one you describe.
- noremorse - 07-29-2006
Nope, I'm running RP 06.9, the one you sent me.
I'm not sure why I suddenly found myself struggling to get across the bridge, because I didn't with the older version.
Edit 2006.07.29 17:38:
RP Version 6.9
(RW, I think you forgot to update it to 7
)I am continuing to get severe FPS drops all over Soluthis. I cannot step foot outside the Imperial Districts without a massive hit on my performance, dropping below 1 FPS.
I am experiencing similar performance loss in my Soluthis0102 claim when playtesting. It's not near as critical, but it's harsh none the less. Considering it has only 65,000 faces in the cell, I should be getting at the very least 45 FPS. I get somewhere along the lines of 12 at the moment.
Is anybody else experiencing this problem? I think it could be a memory leak on my part, but I don't know where.
- TheImperialDragon - 07-29-2006
Hmm... I have my graphics settings set to just about as high as they will go, so I'll have a look.
Edit: Do you have your view in 1st person or 3rd? 1st runs much smoother.
- noremorse - 07-29-2006
1st. But if I'm getting 1 FPS in 3rd person I'm sure I wouldn't get anything better in 1st.
- Razorwing - 07-29-2006
Quote:Originally posted by noremorse
1st. But if I'm getting 1 FPS in 3rd person I'm sure I wouldn't get anything better in 1st.
I've been mindful to keep the facecount for each cell in Soluthis between 200k and 300k, and I think most cells adhere to that. I.e. I don't know of one that doesn't but I haven't checked all of them so I won't swear by it. One idea could have been that the high-res textures would cause a problem, but I see from your specs that you have as much RAM as I do, so that can't be it. Very strange. ?(
- TheImperialDragon - 07-29-2006
Your system is better than mine, and mine runs pretty smoothly... weird...
1 GB RAM
Nvidia 6800 (or was it 5800?)
Around 2200 GHz with a 1.8 GHz processor, it seems that that one was actually capable of a lot.
- Siegfried - 07-30-2006
I've experienced major frame hits on that dang bridge too, around 5-10 fps second. I average somewhere between 15-25 normally (though it will flucuate a lot at certain times)
I also get major hits in both Imperial Districts.
My system:
Nvidia 6800 GT
1 gig of ram
2.20 ghz processor