+- Silgrad Tower from the Ashes (https://www.silgradmodding.net/forum)
+-- Forum: Archived (closed boards) former hosted projects for Oblivion. (https://www.silgradmodding.net/forum/Forum-Archived-closed-boards-former-hosted-projects-for-Oblivion)
+--- Forum: TESIV: Black Marsh (https://www.silgradmodding.net/forum/Forum-TESIV-Black-Marsh)
+---- Forum: Models & Textures (https://www.silgradmodding.net/forum/Forum-Models-Textures)
+---- Thread: TMJ's Garuda Race (/Thread-TMJ-s-Garuda-Race)
- The Modax Jago - 05-21-2009
Here is the Garuda Race with textures. Enjoy.
http://files.filefront.com/GarudaSCENErar/;13786827;/fileinfo.html
These posts were excised from -this thread- /Rw 090526
- Ibsen's Ghost - 05-21-2009
Awesome! The bird-folk of the Black Marshes have arrived! :bananarock:
Do you know how I can have him converted into .nif and .dds format? I'm afraid I don't have 3dsmax. One of our in-house modellers may be able to do it though.
- The Modax Jago - 06-02-2009
Ok. This is the file for the Gurada race.
Its in 3dsmax9 format.
It really could use better textures.
http://files.filefront.com/hawkmanRAWzip/;13844260;/fileinfo.html
- Ibsen's Ghost - 06-03-2009
Cool!
Thanks, TMJ!I'm not 3dsmax9 literate, I'm afraid. Nor do I have the program but I can probably do something with the textures. Actually, I'm hoping we can get someone in to animate it. I shall have to go head-hunting....unless you have the time yourself? I know that nick_op is now busy so that's no longer an option. Anyway, it shall be done!
- nick_op - 06-03-2009
Ibsen, you'll probably want someone to get it into .nif format, so that anyone that wishes to have a go will be able to import it into the modelling program of their choice. You'll need someone with 3ds Max 9 or higher to do this, though.
- InsanitySorrow - 06-03-2009
Quote:Originally posted by nick_op
Ibsen, you'll probably want someone to get it into .nif format, so that anyone that wishes to have a go will be able to import it into the modelling program of their choice. You'll need someone with 3ds Max 9 or higher to do this, though.
How hard is it to do this?, I have Max 2009, but aint used it before
, if its simple import/export I could try it. But anything above that and someone else would have to do it.
- nick_op - 06-03-2009
Quote:Originally posted by InsanitySorrowIt's fairly simple. First off, you'll want to select all of the pieces of the mesh and reset the x-form (should be on the utilities panel). Then use the 'mesh export' settings listed here. If you do that and post the result I'll check to see that it's worked later.
How hard is it to do this?, I have Max 2009, but aint used it before
- InsanitySorrow - 06-03-2009
Quote:Originally posted by nick_op
It's fairly simple. First off, you'll want to select all of the pieces of the mesh and reset the x-form (should be on the utilities panel). Then use the 'mesh export' settings listed here. If you do that and post the result I'll check to see that it's worked later.
Those settings are beyond me, but the second I get a chance today I will at least attempt it. Might not get anywhere but who knows
- Ibsen's Ghost - 06-03-2009
Let me know if you figure it out, IS because I have another creature in 3dsmax that I'd been keeping, hoping I could have it converted some day. It would make another fabulous addition...
- Deeza - 06-03-2009
What creature is that?