Claim: Ebb14 - Sparrow's Shack (Claimed, Finished)
|
04-21-2007, 02:49 PM,
|
|||
|
|||
Quote:Originally posted by SACarrow Not sure if I get what you're proposing 100%, but I understand there will be two ESPs, one without dialogue, one with. Whichever is deemed appropriate to have work continued on will be used, and the NPC data will be merged to that ESP. Quote:Originally posted by SACarrow For that specifically, try placing an XMarker inside the shack. Any XMarker will do, then see what happens. |
|||
04-21-2007, 09:18 PM,
|
|||
|
|||
I did not experience any warnings after I cleared the DIAL tree using the TES4 PU and the new ESM 2_04.
|
|||
04-28-2007, 08:02 PM,
|
|||
|
|||
Cannot create pathgrid
Almost there. I think I understand dialogue and AI well enough to set up things initially, but I can't set up a pathgrid. More info on this thread.
Thanks, Steve |
|||
05-01-2007, 12:35 AM,
|
|||
|
|||
I just can't sleep!
I think I have a reasonable pathgrid and some basic dialogue, at least enough to get it into the ESM. The problem I have now is AI. Right now, I have just two packages: the fallback wander and a sleep package I adapted from someone else. Very simple: sleep 8 hours starting at 4 AM, lock and unlock doors, equip and unequip armor & weaponry. The problem now is that at the appointed hour, Sparrow goes to the bedroll and just stands there.
For this test, I stuck a simple bedroll on the floor and the red PG TH intersects the standing silhouette. The location is near the persistent reference of the bedroll, but she won't sleep; she just stands. Any things I can look at before just posting the ESP for analysis? TIA, Steve UPDATE: GetCurrentAIProcedure value was 7 (Wander), GetCurrentAIPackage was 4 (Sleep). I have no idea what to do with that. |
|||
05-01-2007, 05:35 AM,
|
|||
|
|||
It would be that much easier to determine the problem if I could have a look at the file.
|
|||
05-01-2007, 08:09 PM,
|
|||
|
|||
I was afraid of that...
But my searching through the forums at TES only turned up one complaint that looked like mine -- and nobody responded. Here is the ESP and a model for the bedroll. Nothing original, just using a different furniture marker. Place it under Meshes\ST\Dunmer\Shack\Furniture. Also feel free to sub another bed; I've already tried a couple.
Thanks for the help, Steve |
|||
05-01-2007, 09:18 PM,
|
|||
|
|||
Why does it say "Bad AI" in the filename?
|
|||
05-01-2007, 09:31 PM,
|
|||
|
|||
Because the AI doesn't work.
|
|||
05-01-2007, 09:31 PM,
|
|||
|
|||
Quote:Originally posted by SACarrow Mwahaha :brew: |
|||
05-02-2007, 03:58 AM,
|
|||
|
|||
I looked, it looks like it should work. I'd try specifying the location to "Near Reference" and select the bed as the reference, see if that helps any.
If not, maybe it's the editted bedroll? It might need to be used with certain animations to work, but you said you tested it with other models, so I don't think that's the problem. hrug: |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)